IBM AS/400 9404 C-10: Difference between revisions
No edit summary |
|||
| Line 16: | Line 16: | ||
! Inventory ID !! Model !! Submodel !! Comments |
! Inventory ID !! Model !! Submodel !! Comments |
||
|- |
|- |
||
| || 9404 || C-10 || Fitted with two hard disk drives and one 150MB Tape drive |
| 234|| 9404 || C-10 || Fitted with two hard disk drives and one 150MB Tape drive |
||
|} |
|} |
||
Revision as of 11:33, 16 June 2024
Hardware Description
Overall Description
The system is structured in several boards connected to a backplane at the rear of the machine, while the peripherals are placed at the front. The system has room at the front for an extra power supply unit, a battery, three full height 5 1/4" hard disk drives, a tape drive and a floppy drive.
Microprocessor
While usually microprocessors work with words whose length is power of two, the CISC CPU the early AS/400 models had are 48 bits wide. Its family derives from the System/38 and is known as IMPI and althought being code-compatible with the former, its instruction set is unknown outside IBM.
Input/Output Control
The input/output control board of the C-10 is an intelligent system per se. It includes a 68000 microprocessor to handle petitions from and to the peripherals. It has 128KB of ROM and 768KB of DRAM. It also contains a NEC 765 as a floppy controller.
Units in collection
| Inventory ID | Model | Submodel | Comments |
|---|---|---|---|
| 234 | 9404 | C-10 | Fitted with two hard disk drives and one 150MB Tape drive |